Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin APS430 - Europe - (PPE+PPS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin APS430 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL GTX™ APS430 resin is a 30% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has a UL V0 flame rating, non-brominated, non-chlorinated FR, high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX APS430 resin is an excellent candidate for electrical and lighting connector applications.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
성형 수축률, 평행 0.8 % ISO 294-4, 2577
성형 수축률, 수직 0.1 % ISO 294-4, 2577
ASTM 데이터
용융 흐름성, MFI 43.6 g/10min ASTM D 1238
온도 300 °C -
하중 5 kg -
성형 수축률, 평행 0.005 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
항복변형률 1.2 % ISO 527
파단시 강도 92 MPa ISO 527
챠피 충격 강도, -30°C, 3mm 27 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 16 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 7 kJ/m² ISO 179/1eA
ASTM 데이터
굴곡 계수 8620 MPa ASTM D 790
굴곡 강도 166 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 78 J/m ASTM D 256
Other Standards[S]
항복강도 122 MPa Producer Method
파단시 신율 10 % Producer Method
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 233 °C ISO 75-1/-2
선형 열팽창 계수, 평행 58 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 0.8 mm -
Yellow Card 유효한 예 - -
ASTM 데이터
UL94 난연성 V-0 - UL 94
테스트 두께 0.8 mm -
DTUL @ 264 psi 255 °C ASTM D 648
전기적 특성값단위시험규격
ISO 데이터
CTI 150 - IEC 60112
ASTM 데이터
상대 유전율, 60 Hz 3.3 - ASTM D 150
표면 저항 1E16 Ohm ASTM D 257
부피 저항 2.1E15 Ohm*cm ASTM D 257
기타 특성값단위시험규격
물에서의 흡수성, 24hr 0.02 % ASTM D 570
밀도 1480 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
특별 특성
난연성, Halogen-free, 열안정성
내화학성에
General Chemical Resistance
응용
전기 및 전자
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.